5 Way Flame Sensor Module

5-Channel Flame Sensor Module is a 5 channel flame detector module used to detect flame in the larger area( >120 degrees).
If you need a robot which should detect any fire around, then this module will be very useful for you. It detects the fire with 5 flame sensors which are arranged with 30 degrees.

This module outputs an analog signal, which would be more precise, and also digital signal which would be more easy to use, you can adjust the digital output sensitivity by the onboard potentiometer. The 5 LED indicators are helpful in your debugging, the high-precision resistors also make this sensor more precise than other flame sensors. This module is sensitive to the flame and radiation. It also can detect ordinary light source in the range of a wavelength 760nm-1100 nm. lighter flame test distance of 80cm, for the greater the flame, the farther the distance test.

Features:

• It adopts a five-way flame sensor design with a wide detection range (the detection range of a common single flame sensor is about 30°, and the range gradually decreases with increasing distance. The detection range of this product is more than 120°)
• Can output digital signals (high and low level), easy to use
• It can output analog signals (voltage signals), which can measure signals more accurately, suitable for high precision occasions.
• All five outputs have status indicators, which makes it much convenience in debugging or in actual operation.
• Digital output detection distance is adjustable, analog output sensitivity is adjustable, and the design is more flexible.
• Adopting 1% resistor design (the flame detector on the market is designed with 5% resistor), the signal output is more accurate, suitable for occasions requiring high-preision measurement.
• Three M3 mounting holes on board for easy installation
• 3.3V-9V, compatible with most single-chip systems
• SMD devices are fully automatic welded by SMT process, and the quality of military products is trustworthy.

Principle of Operation: