Weight Sensor – Load Sensor – 50kg

This is a half-bridge load sensor, which is widely used in weight scales. When the half-bridge is being stretched, it
sends signal via the red signal wire. You can use multiple load sensors simultaneously to increase the capacity range.
Two sensors full-bridge measurements: 50kgx2=100kg
Four sensor full-bridge measurements: 50kgx4=200kg
Parallel use to add additional capacity

Specifications:

• Capacity (kg): 50
• Comprehensive error (%F.S): 0.10
• Output sensitivity (mv/V): 1.0 0.15%
• Nonlinearity (%F.S): 0.05
• Repeatability (%F.S): 0.05
• Hysteresis (%F.S): 0.05
• Creep (%F.S/3min): 0.1
• Zero Drift (%F.S/1min): 0.1
• Temp. Effect on zero (%F.S/10C): 0.3
• Temp. Effect on Output (%F.S/10 C): 0.1
• Zero Output (mv/V): 0.3
• Input Resistance (): 1000 10
• Output Resistance (): 100010
• Insulation Resistance (M): 2000 (100VDC)
• Excitation Voltage (V): 10
• Operation Temp. Range (C): -10~ 50
• Overload Capacity (%F.S): 150
• Method of connecting wire: Red= Sig ; White= Exc ; Black= Exc
• Dimension (mm): 34*34*8