Raspberry Pi Pico W

The new Raspberry Pi Pico W is a wireless-enabled version of the RP2040-based board, adding 2.4GHz 802.11n WiFi connectivity!

The addition of wireless connectivity opens up the Pico W to a vast new range of projects such as remote sensor readings, remote control, home automation, mini web servers, wireless GPIO pin control and much, much more!

At the heart of the Pico W is the RP2040 – the same chip used in the original Raspberry Pi Pico, featuring two ARM Cortex-M0+ cores clocked at 133MHz; 256KB RAM; 30 GPIO pins; and a broad range of interfacing options. This is paired with 2MB of onboard QSPI Flash memory for code and data storage.

WiFi is enabled via the use of an Infineon CYW43439 wireless chip. The CYW43439 supports IEEE 802.11 b/g/n wireless LAN, and Bluetooth 5.2; however only wireless LAN is software-supported at launch

 Raspberry Pi Pico W Technical Specifications:

• MCU : Raspberry Pi RP2040 dual core Cortex-M0+ microcontroller
• SRAM: 264KB
• Power Supply: 5V via micro USB port or 1.8 to 5.5V DC via VSYS pin
• Internal Flash Memory: 2MB
• Clock Frequency: 133MHz
• Bluetooth 5.2 (software not supported at launch)
• USB : 1x Micro USB 1.1 port used for power and programming
• Debug : 3-pin Lever Serial Cable Debug (SWD) port
• Internal Flash Memory: 2MB
• Misc : BOOTSEL button, user LED (WL_GPIO0), RTC
• IEEE 802.11 b/g/n wireless LAN
• Low power sleep and sleep modes
• 2×SPI, 2×I2C, 2×UART, 3×12-bit ADC, 16×controllable PWM channels
• Temperature Range : -20°C to 70°C
• Dimensions : 51x21mm